The art of drafting: how to save energy
Every bunch ride contains a small energy tax paid by whoever happens to be at the front. On a flat road into a headwind, that rider can work harder than the rest simply because their body is breaking the moving air. Everyone behind shelters in the slipstream, settles into a comfortable cadence and arrives wondering why their legs feel fresh for a ride that was meant to be hard. The rider out front may feel the opposite.
The art of drafting is not about hiding at the back and refusing to contribute. It is about deciding when the aerodynamic saving is worth more than the effort of leading, then sharing that load before fatigue turns it into a roadside argument. A well-run bunch makes a demanding route manageable; a badly run one wastes the advantage through sudden surges, chaotic wheel changes and an endless contest over who can accelerate hardest. Understanding the difference begins with knowing what position does to a rider.
Why the front wheel costs more
At 40 kilometres per hour, roughly 80 to 90 per cent of a cyclist’s energy on a flat road goes into overcoming aerodynamic drag. Hills, heavy loads and lower speeds change the proportion, but the air still has a say. The rider at the front cuts through undisturbed air while the followers negotiate the turbulent wake of the wheel ahead. It is an expensive piece of real estate, and the occupant pays the bill.
Drafting can reduce that aerodynamic penalty substantially, commonly by around 20 to 40 per cent when a rider sits close enough to the preceding wheel. The saving depends on speed, distance, body position and the leader’s movement. Too far back and the useful slipstream has dissipated; too close and the follower risks touching a wheel that suddenly moves sideways. The practical sweet spot is roughly half a wheel to one full wheel behind, with enough space to react.
That makes drafting an energy-management tool rather than a magic trick. A follower may need less power to hold the same speed, but they still have to pedal, remain alert and manage the minor surges caused by imperfect lines. A properly opim bunch shares the front position in a controlled way. It avoids making one rider serve as the group’s unpaid air conditioner for the entire ride.
Choosing a wheel worth following
The best wheel to follow is not automatically the wheel belonging to the strongest rider. It is usually the wheel of someone powerful, steady and comfortable in the wind. That rider can hold a line, maintain an even cadence and avoid the constant movement that makes life difficult directly behind them. A quick climber may save you a few watts on a climb but struggle to keep the pace steady afterwards. A fast sprinter can be equally frustrating if every metre becomes a contest.
Conditions can alter the ideal choice. On Sydney’s coastal routes, a strong crosswind may make the exposed front rider more important than a designated lead-out specialist. Melbourne’s CBD laneways can funnel wind into narrow streets, producing sudden gusts and changing the order of the bunch. In those places, following a rider who can handle a wobble or an unexpected surge may be more valuable than following the rider with the best sprint finish.
Professional teams apply the same principle in more polished form. Domestiques might hold a steady line for their leader before peeling away one by one, while a sprint train creates a moving shelter toward the finish. A local bunch lacks radios, contracts and a mechanic following behind, but the basic calculation remains the same. Follow a wheel that will make the road easier, contribute when the group needs it, and move up when conditions make a different rider more useful.
Reading wind, terrain, and traffic
Wind determines where the slipstream works. A tailwind reduces the air speed relative to the rider, making the effort of holding position easier. A headwind does the opposite and leaves little aerodynamic benefit to be gained from simply sitting behind someone. In a crosswind, riders often form an echelon, taking turns at the front and sheltering on the less exposed side. The rider best able to control the bunch in that wind should often lead, even if they are not the strongest climber in the group.
Terrain changes the rules again. On a steep Adelaide Hills climb, the gradient may matter more than the slipstream, especially when riders stand to pedal. On a descent, aerodynamics becomes less important because gravity is supplying considerable assistance, while the risk of following too closely rises sharply. Corners require single file, so the bunch cannot maintain its aerodynamic formation. Melbourne’s tram tracks, Sydney’s busy intersections and roundabouts scattered across Australian roads add another layer: a technically smooth line is worth more than a theoretically perfect one.
Traffic therefore belongs in the drafting calculation. Most local bunches keep left and move into single file for turns, junctions and any section with limited visibility. Calling hazards, signalling moves and avoiding overlapping wheels preserve both speed and sanity. A group that fractures at every roundabout has wasted the energy it hoped to save. The best drafting line is the one that remains practical when the road stops being a perfectly aerodynamically clean ribbon.
Building smarter bunch-riding habits
The biggest energy loss in many bunch rides comes from repeated surges rather than the unavoidable work of holding pace. A rider attacks from the back, accelerates halfway up the wheel and forces everyone to respond. Ten seconds later, another rider tries the same trick. These bursts can be spectacular, provided someone films them, but they repeatedly break the group’s rhythm and cancel the benefit of a smooth rotation.
A smoother rider sits at a comfortable distance, matches the cadence of the wheel ahead and avoids drifting into the space occupied by another bicycle. When moving up, the rider approaches from the side with room available, passes the rear wheel without overlap and settles into the line without forcing the leader to accelerate. Leading well also means matching the group’s intended pace rather than proving that the front position produces a higher heart rate.
Drafting skills improve through practice in groups, especially on rolling terrain and in crosswind. Riders can practise holding a line, changing position and taking a turn without turning each movement into an audition. Solo sessions still build fitness, but they cannot teach the subtle timing required to follow a wheel without making everyone nervous.
Fuel and hydration remain essential. Drafting may reduce the power needed to hold a speed, yet Brisbane’s summer heat and humidity can raise the demand for fluid and electrolytes. Riders should eat before fatigue arrives, drink according to conditions and avoid saving so much energy in the wheels that they arrive depleted. Saving energy works best when the plan includes spending it later at the right moment.
Putting drafting into practice on Australian roads
A useful routine is to arrive early, read the conditions and decide what the ride is likely to demand. Wind direction, the planned route and the quality of the bunch can matter as much as the distance. A lunchtime loop may be quick and social, while an extended ride into a strong headwind requires a more conservative rotation. Choosing the right group also gives a beginner access to riders who understand positioning and pace.
Prepare the ride
- Check the wind direction and strength, then identify where exposed sections will slow the group
- Choose a target wheel based on steadiness and wind handling rather than reputation alone
- Agree on common signals for moving up, pulling through and warning the group of hazards
- Carry enough water and food for the expected effort, especially during hot or humid weather
Once rolling, the rider should stay attentive to more than the wheel in front. Watching the road several seconds ahead reveals potholes, debris, animals and traffic before they become urgent. Staying relaxed through the front section also preserves a useful cadence. Drafting rewards riders who remain predictable, because the group can organise itself around a leader who does not make everybody guess what comes next.
Work the position
- Sit close enough to benefit from the slipstream while leaving a clear gap from the wheel ahead
- Match the leader’s speed smoothly and avoid unnecessary acceleration when the road opens
- Move up from the side with adequate space, then settle into the line without overlapping wheels
- Take a turn at the front when useful and rotate before fatigue creates a large speed drop
The fastest way to develop this skill is to experience it with other riders. LetsRide.co helps cyclists find local group rides and cycling events suited to their location, pace and preferred riding style. Join a lunchtime bunch, try a coastal route or find an event that matches your fitness level, then pay attention to where the energy goes. Use the front wheel when it helps the group, exploit the shelter when conditions allow and share the load before the Australian summer heat or the final climb takes its toll.